Home 
Products Point-to-Multipoint Tsunami® MP.11 HS 4454
The Tsunami® MP.11 HS 4454 is an ultra-secure FIPS 140-2 level 2 certified Point-to-Multipoint solution for Federal, DoD and NATO applications. It integrates hardware based AES-256 bit encryption and secure mgmt features into one single solution
The Tsunami® MP.11 HS 4454 employs advanced OFDM technology along with Proxim’s Wireless Outdoor Routing Protocol (WORP) to dynamically adapt to ever changing network loads for optimum performance
Wide range of frequencies with support for 4.4 – 5.0 GHz (NAT0) and unlicensed 5.2 – 5.8 GHz frequency bands using a single dual band radio
Proxim’s QoS provides higher levels of prioritization with up to 512 service level classifications, enabling superior quadruple-play applications like video, voice, data and mobility with low latency
The ProximVision ES centralized network management system now supports Tsunami® MP.11 HS products, providing rapid network deployment and mobile configuratio
Audible tone and real-time signal strength measurement allows quick installation. Pelletier heating and cooling technology inside a ruggedized enclosure enable deployment in extreme weather conditions
| PRODUCT MODELS | |
| 4454-BSUR | Tsunami® MP.11 HS 4454 Ruggedized Base Station / Subscriber and Converter Amplifier (two (2) physical units) with PoE injector |
| RADIO & TRANSMISSION | |
| PROTOCOL | Wireless Outdoor Router Protocol (WORP) |
| MODULATION METHOD | OFDM 64 |
| UNLICENSED FREQUENCIES | 5.2 – 5.8 GHz |
| LICENSED FREQUENCIES | 4.4 – 5.0 GHz |
| CHANNEL SIZE | 20, 10 and 5 MHz |
| DATA RATE | 54, 48, 36, 24, 18, 12, 9, 6, 4.5, 3, 2.25, 1.5 Mbps |
| Tx POWER | 27 dBm at CA unit antenna ports |
| CONNEXION | |
| ETHERNET CONNECTOR | 245054_RC-BSU-G : One (1) RJ45 Auto-sensing 10/100baseT with PoE in 5044-CA : Two (2) RJ45 in pass-trough mode - port #1 with PoE in - port #2 with PoE out (to power RF unit) |
| ANTENNA CONNECTOR | 245054_RC-BSU-G : Two (2) N-type connectors 5044-CA : Four (4) N-type connectors - two (2) connectors to be linked to 245054_RC-BSU-G unit - one (1) connector to be linked to 4.4 – 5.0 GHz antenna - one (1) connector to be linked to 5.2 – 5.8 GHz antenna |
| SERIAL CONNECTOR | 245054_RC-BSU-G : One (1) RJ11 (RJ11 to DB9 dongle provided) 5044-CA : One (1) RJ11 (for debug purpose only) |
| SECURITY | |
| FIPS CRYPTOLOGY | FIPS 140-2 Level 2 |
| WIRELESS ENCRYPTION | 256-bit AES exceeds current requirements by NIST |
| SECURE WIRELESS PROTOCOL | Wireless Outdoor Protocol (WORP), Intracell blocking, BSU/SU mutual authentication |
| SECURE MANAGEMENT | SSL, SSH, HTTPS |
| MANAGEMENT | |
| LOCAL | RS-232 Serial Port (RJ11 and DB9) |
| REMOTE | SSH, SSL, Telnet, HTTPS |
| SNMP | SNMPv3; MIB-II, Ethernet-like MIB; 802.3MAU; 802.11MIB; Private MIB; ORiNOCO MIB; RFC 1157; RFC 1213; RFC 1643; RFC 1493; RFC 2668 |
| POWER | |
| INPUT TO POE INJECTOR | 90 – 264 VAC / 47 – 63 Hz |
| OUTPUT FROM POE INJECTOR | Current max 1.2 A at 48 VDC |
| POWER CONSUMPTION | Maximum 60 Watt |
| POWER OVER ETHERNET | Via RJ-45 Ethernet Interface Port |
| PHYSICAL SPECIFICATONS | |
| DIMENSIONS (UNPACKAGED) | 245054_RC-BSU-G : 10.79 x 11.14 x 3.38 in (274 x 283 x 86 mm) 5044-CA : 10.79 x 11.14 x 3.38 in (274 x 283 x 86 mm) |
| WEIGHT (UNPACKAGED) | 245054_RC-BSU-G : 7.38 lbs (3.35 kg) 5044-CA : 7.93 lbs (3.6 kg) |
| ENVIRONMENT | |
| TEMPERATURE | 245054_RC-BSU-G / 5044-CA : -30˚ to +60˚ C (operating) 245054_RC-BSU-G / 5044-CA : -55˚ to +80˚ C (storage) |
| HUMIDITY | 100% (non condensing) |
| IP RATING | IP 67 |
| PACKAGE CONTENT | |
|
|
| WARRANTY | |
| 1 Year Parts and Labor | |
| COMCODE | Description | For Use With | |
| CBL-5054-600-6 | 6 ft Super-Low Loss Coaxial Antenna Cable, 0.600”, St-N - Male-Male | MP.11HS 4454 | |
| 5054-SURGE | Surge Arrestor 5 GHz - Standard-N Female to Female | MP.11HS 4454 | |
| CBL-5054-400-20 | 20 ft Low Loss Coaxial Antenna Cable, 0.400”, St-N - Male-Male | MP.11HS 4454 | |
| CBL-5054-600-50 | 50 ft Super-Low Loss Coaxial Antenna Cable, 0.600”, St-N - Male-Male | MP.11HS 4454 | |
| CBL-5054-400-50 | 50 ft Low Loss Coaxial Antenna Cable, 0.400”, St-N - Male-Male | MP.11HS 4454 | |
| 69819 | 25m outdoor, RJ45 terminated CAT5 cable for MP.11 and QB.11 and one weather-proof Ethernet port cap | MP.11HS 4454 | |
| 69821 | 75m outdoor, RJ45 terminated CAT5 cable for MP.11 and QB.11 and one weather-proof Ethernet port cap | MP.11HS 4454 | |
| ETH-STP-25 | 25m outdoor, RJ45 terminated, UV Rated, STP Shielded CAT5e cable | MP.11HS 4454 | |
| ETH-STP-50 | 50m outdoor, RJ45 terminated, UV Rated, STP Shielded CAT5e cable | MP.11HS 4454 | |
| ETH-STP-75 | 75m outdoor, RJ45 terminated, UV Rated, STP Shielded CAT5e cable | MP.11HS 4454 | |
| 74962 | Spare Power DC Injector for Tsunami MP.11, MP.16 and QuickBridge.11 (R Models ONLY) and AP4000MR/AP4900MR | MP.11HS 4454 | |
| ETH-SURGE-1G | Gigabit surge protector for PoE with shielded RJ45 |  A4 |
MP.11HS 4454 |
| RF-SURGE-N | 2-6 GHz High Performance RF Lightning Arrestor, N-Female to N-Male Protected | A4 |
MP.11HS 4454 |
| 2418-CA-KIT | 1.8 GHz Amplifier Kit with Mounting Hardware, DC Injector and 110-220 V AC PSU | MP.11HS 4454 | |
| 2418-CA | 1.8 GHz Amplifier Kit with Mounting Hardware only (for use with Rack Enclosure) | MP.11HS 4454 | |
| 2418-CA-I | 1.8 GHz Amplifier Kit (for use with mobile version) | MP.11HS 4454 | |
| 74875 | Cable Feed-Through Sealing Cap kits, PACK OF 20 | MP.11HS 4454 | |
| ETH-IP67-KIT | Accessories, IP-67 Rating, RJ45 Cable Extended Kit | A4 |
MP.11HS 4454 |
| 8000-UMK | Outdoor Universal Mounting Kit for TMP.11; TMP.16; TMP8000 | MP.11HS 4454 | |
| 81087-UMK | Tsunami MP.11 5012-SUR Universal Mounting Kit for roof, wall or under-eave mounting | MP.11HS 4454 | |
| 245054-MNT | 245054 MNT – Mounting bracket for non-ruggedized MP.11 HS Includes: bracket(1) in plastic bag without screws or box | MP.11HS 4454 | |
| GIG-POE-INJ-48VDC-T | Gigabit 48V DC PoE Injector with Terminal Jack | A4 |
MP.11HS 4454 |
