Multipoint 10200 CPE/CPA Specifications [JP]

Specifications

 
INTERFACES
WIRED ETHERNET One auto MDI-X RJ45 10/100/1000Mbps Ethernet with PoE in & Data
WIRELESS PROTOCOL WORP® (Wireless Outdoor Router Protocol)
RADIO & TX SPECS
MIMO 2×2:2
MODULATION OFDM with BPSK, QPSK, QAM16, QAM64, QAM256
FREQUENCY 4.900 – 5.925 GHz (Subject to Country Regulations)
CHANNEL SIZE 20 MHz and 40 MHz, Upgradeable to 80 MHz (±5ppm Channel Accuracy)
DATA RATE MCS 0 to 9 with Dynamic Data Rate Selection
TX POWER Up to 28 dBm (dual chain)
TX POWER CONTROL 0 – 27 dB, in 1 dB steps. Automatic TPC with configurable EIRP limit
  80 MHz 40 MHz 20 MHz
TX POWER (dual RF) MCS0: 28 MCS0: 28 MCS0: 29
MCS9: 21 MCS9: 22 MCS8: 25
RX SENSITIVITY (Per=10%) MCS0: -89 MCS0: -93 MCS0: -94
MCS9: -68 MCS9: -71 MCS8: -74
THROUGHPUT 324 Mbps upgradeable to 672 Mbps
OTHER Dynamic Channel Selection (DCS) based on interference detection
Dynamic Frequency Selection (DFS) based on radar signature
Automatic Transmit Power Control (ATPC) with EIRP limit support
ANTENNA
MP-10200-CPA Two N-type Connectors
MP-10250-CPE Integrated 15 dBi dual Polarized (H+V) panel antenna (12 dBi before 5.000 GHz and 14 dBi beyond 5.850 GHz)
ANTENNA PATTERNS (Sector Mode)
MP-10250-CPE Excel
H-pol Azimuth
Multipoint 10250-CPE H-pol Azimuth Plot
V-pol Azimuth
Multipoint 10250-CPE V-pol Azimuth Plot
   
H-pol Elevation
Multipoint 10250-CPE H-pol Elevation Plot
V-pol Elevation
Multipoint 10250-CPE V-pol Elevation Plot
MANAGEMENT
REMOTE Telnet and SSH, Web GUI and SSL/TLS1.2, TFTP, SNMPv3
SNMP SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB
OTHER Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer
Multi-Language Support Web Interface available in English, French, Spanish and Chinese
SYNCHRONIZATION
Pass-trough SyncE and Precision Time Protocol (IEEE 1588v2) Ethernet Synchronization
SECURITY
ENCRYPTION AES 128, upgradeable to AES 256
AUTHENTICATION Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning)
QoS
Asymmetric Bandwidth Control Asymmetric UL/DL committed and maximum information rate per service flow
Packet Classification Capabilities 802.1p priority, IPTOS, VLAN ID, IP addresses, ports, Ethernet addresses, IP protocol, and EtherType
Scheduling Best Effort, Real Time Polling Services
NETWORK
MODES Bridging, Routing (RIP v2 and IP tunneling)
IP STACK IPv4 and IPv6 simultaneously
GATEWAY FEATURES DHCP Server & relay, NAT with Std ALGs, PPPoE end point with Proxy DNS
VLAN 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging
POWER
INPUT OUTPUT
36 to 57 VDC via Ethernet port(Power over Ethernet)  
12 VDC via Access port 12 VDC on Access port
Power should not be provided simultaneously on both ports.  
POWER CONSUMPTION
11.5 Watt typical, 15.5 Watt maximum
ENVIRONMENTAL SPECS
TEMPERATURE OPERATING -40º to 60ºC (-40º to 140º Fahrenheit)
STORAGE -50º to 70ºC (-58º to 158º Fahrenheit)
HUMIDITY 100% relative humidity
IP RATING IP67
WIND LOADING 180 km/h (112.5 mph)
PHYSICAL SPECS
PRODUCT MODELS DIMENSIONS (PACKAGED) DIMENSIONS (UNPACKAGED) WEIGHT (PACKAGED WEIGHT (UNPACKAGED
MP-10250-CPE 11.81×10.83×5.31 in (300x275x135 mm) 4.96×8.62×2.58 in (126x219x65.5 mm) 7.27 lbs (3.3 Kg) 2.10 lbs (0.950 kg)
MP-10200-CPA 11.81×10.83×5.31 in (300x275x135 mm) 5.02×8.68×2.85 in (127.5×220.5×72.5 mm) 6.39 lbs (2.9 kg) 2.75 lbs (1.250 kg)
SAFETY STANDARDS
IEC 62368-1:2016 & 60950-22:2016
UL 62368-1 2nd edition & 60950-22 2nd edition
CAN/CSA C22.2 No 62368-1:14 & No 60950-22:17

EN 62368-1:2014 + A11:2017 & 60950-22:2017
CERTIFICATIONS
USA: FCC 90Y + 15E (UNII 15.247)
Canada: IC RSS 102 + RSS 111 + RSS 247
Europe: RED EN 301 489-1 + EN 301-489-17 + EN 301 893 + EN 302 502
Railway: EN 50155 + EN 50121 + EN 61373
PACKAGE CONTENTS
  • One Tsunami® MP-10250-CPE with integrated dual polarized antenna
    Or One Tsunami® MP-10200-CPA with two N-type connectors
  • One power injector and country specific power cord
  • One Connector weatherproofing kit (Includes all recommended weatherproofing material)
  • One Wall / Pole mounting kit (MP-10250-CPE) Or One Pole mounting kit (MP-10200-CPA)
  • One Grounding kit
  • One Quick Installation Guide
MTBF & WARRANTY
MTBF over 250 000 hours & 2-year warranty with ServPak Extended Support available
ORDERING INFORMATION
MP-10250-CPE-US Tsunami® MP 10250 Customer Premise Equipment, 400 Mbps, MIMO 2×2, 15dBi panel | Part Number : 901-00320
MP-10250-CPE-WD Tsunami® MP 10250 Customer Premise Equipment, 400 Mbps, MIMO 2×2, 15dBi panel | Part Number : 901-00321
MP-10200-CPA-US Tsunami® MP 10200 Customer Premise Equipment, 400 Mbps, MIMO 2×2, N-Type Connectors | Part Number : 901-00314
MP-10200-CPA-WD Tsunami® MP 10200 Customer Premise Equipment, 400 Mbps, MIMO 2×2, N-Type Connectors | Part Number : 901-00315
LICENSE UPGRADES
MP-102×0-CPx-866-UPG Tsunami® MP 10200 Customer Premises Equipment, 400 Mbps to 866 Mbps license upgrade | Part Number : 997-00047
MP-102×0-CPx-AES256-UPG Tsunami® MP 10200 Customer Premise Equipment, AES 128 to AES 256 license upgrade | Part Number : 997-00048

Which Product is Right for You?